THE HYDRA SERIES OF SPRAYERS ARE BUILT TO EFFORTLESSLY TACKLE ULTRA-HEAVY COATINGS
Bridges, water tanks, roofing, foundations and other large projects require the kind of hydraulic piston power only a Hydra™ can deliver. It is the ultimate sprayer for any job where maximum power is required and dependability is critical.
Sprays ultra-heavy coatings like drywall mud, epoxies, mastics and elastomerics
Choose from a siphon fed or remote pump to fit a 50 gallon drum
Maximum Fluid Section Life Titan’s ultra slow-stroking hydraulic piston maximizes fluid section life
Designed for ultra-heavy coatings including mastics, waterproofing and roof coatings
High production unit handles all architectural coatings including epoxies and roof coatings
High performance for hard to spray coatings, multiple guns and long hose length
GPM | LPM 3.30
MAX OPERATING PRESSURE 4000 PSI | 27.6 MPa
MAX TIP SIZE - 1 GUN - GAS 0.60"
MAX TIP SIZE - 2 GUNS - GAS 0.040"
MAX TIP SIZE - 3 GUNS - GAS 0.035"
MAX TIP SIZE - 4 GUNS - GAS 0.029"
MAX TIP SIZE - 5 GUNS - GAS 0.025"
ENGINE 390cc Honda
WEIGHT 370 lbs
RECOMMENDED GALLONS PER WEEK 500+
PART NUMBER - 55 GAL. REMOTE 433-802
PART NUMBER - FILTER MODEL 433-801
PART NUMBER - 3/4" OUTLET MODEL 433-800
WHY CHOOSE RUDD SPRAY EQUIPMENT
Quick turnaround on service and repair
Done right the first time
Full-time service technicians with over 100 years combined experience
Huge onsite inventory of common parts and accessories
Convenient and FREE parking
These guys are pros. They are extremely knowledgeable. They have helped me with my air-assisted airless a few times, and have ordered parts that I needed. They carry products and supplies that other paint stores don't. Highly recommend!
I am a painting contractors in the neighborhood. Chris at Rudd has been repairing my airless and air assisted airless for years. He consistently has been informative about the mechanical issues that come up. Chris is a great technician who promptly resolves the problems at a reasonable cost. I highly recommend taking your equipment to Rudd.
I have and old spray gun and could not find parts for it on the Internet. Talked with Dan in the Ballard store and he was more than helpful. The gun was from the 1970's but he was still able to find me a parts list for it. Very friendly and helpful. Hats off to Dan S.
I had a problem with my Graco Magnum XR-9 airless paint sprayer and thought it was the pump/prime switch. I brought it in to get repaired and Chris helped me. He was very friendly. He figured out that it was only a stuck valve and fixed it for much less than I was expecting to pay.