Product Information
IMPACT 440
SOMETIMES POWER COMES IN A SMALL PACKAGE
The Impact® 440 is ideally suited for residential, property maintenance, and small commercial applications. This high performance electric airless sprayer will apply all standard architectural primer, paints and coatings efficiently.
Sprays: stains, lacquers, enamels, latex, and other low and medium viscosity coatings.
The #1 selling sprayer in the industry is now even better with enhanced features and performance
Designed to consistently spray 50-100 gallons per week
Quad+ Packings™ is designed to wipe abrasive coatings clean during operation, preventing damage to the piston or the main sealing lip
AutoOiler™ allows you to push a button to deliver oil from the reservoir directly to the packings
Sureflo™ Pusher Valve lets you release a stuck lower ball valve without using a hammer
Electronic Pressure Control with Rapid Clean speeds up the flushing and clean-up process
PermaLife™ Cylinder never wears and never needs replacing
Full size manifold filter
SPECIFICATIONS
GPM | LPM 0.54 | 2.05
MAX OPERATING PRESSURE 3300 PSI | 22.8 MPa
MAX TIP SIZE - 1 GUN - ELECTRIC 0.023"
MOTOR 7/8 HP DCX
WEIGHT 42 lbs
RECOMMENDED GALLONS PER WEEK 50-75
ITEMS INCLUDED RX-80 Gun, TR1 517 Tip, 1/4" x 50' Airless Hose
WHY CHOOSE RUDD SPRAY EQUIPMENT
Quick turnaround on service and repair
Done right the first time
Full-time service technicians with over 100 years combined experience
Huge onsite inventory of common parts and accessories
Convenient and FREE parking
These guys are pros. They are extremely knowledgeable. They have helped me with my air-assisted airless a few times, and have ordered parts that I needed. They carry products and supplies that other paint stores don't. Highly recommend!
I am a painting contractors in the neighborhood. Chris at Rudd has been repairing my airless and air assisted airless for years. He consistently has been informative about the mechanical issues that come up. Chris is a great technician who promptly resolves the problems at a reasonable cost. I highly recommend taking your equipment to Rudd.
I have and old spray gun and could not find parts for it on the Internet. Talked with Dan in the Ballard store and he was more than helpful. The gun was from the 1970's but he was still able to find me a parts list for it. Very friendly and helpful. Hats off to Dan S.
I had a problem with my Graco Magnum XR-9 airless paint sprayer and thought it was the pump/prime switch. I brought it in to get repaired and Chris helped me. He was very friendly. He figured out that it was only a stuck valve and fixed it for much less than I was expecting to pay.
I had a problem with my Graco Magnum XR-9 airless paint sprayer and thought it was the pump/prime switch. I brought it in to get repaired and Chris helped me. He was very friendly. He figured out that it was only a stuck valve and fixed it for much less than I was expecting to pay.